The Hickman Wind Resistant Gutter

Wind Resistant Gutters are specifically engineered and tested to meet the requirements of the ANSI/SPRI GT-1 Standard for Gutter Systems. Used with Low-Slope Roofs. The gutter system incorporates a 1-in. wide, 2-piece extruded aluminum internal gutter bracket for strength and support. The bracket also reduces telegraphing of the metal due to expansion and contraction of the gutter during temperature changes. Review the Hickman Wind Gutter Profiles:

Box Profile

FINISHES ON ALL PROFILES

  • Natural mill aluminum
  • Pre-coat Kynar 500® — industry-standard two coat colors.
  • Post-coat Kynar 500 — colors requiring multiple coats or protective clear coats.
  • Anodized aluminum – clear, bronze, and black.

COLOR CHART

Chamfer Profile

TECHNICAL ON ALL PROFILES

  • Engineering and shop drawings are available from the factory.
  • Product samples, detail sheets, color chips, and color charts are ready for your submittal package.
    CAD details are available.
  • For personal assistance with questions or submittals, contact Dean Brown, your local Hickman representative.

CAD DETAIL DRAWINGS

Offset Profile

DESCRIPTION OF ALL PROFILES

  • Hickman Wind Resistant gutters are fabricated from either .040, .050 .080-in. aluminum or either 24 Ga. or 22 Ga. pre-finished steel.
  • Gutter section length is 10-ft. (3048 mm) with 6-in. wide concealed splice plates.
  • Extruded aluminum brackets are installed with the provided #14 x 1.5-in. Universal Fasteners.

ORDER SPECS & PRODUCT DOWNLOAD

Features & Benefits

  • Extruded 1-in. wide aluminum bracket. Designed specifically to strengthen the gutter in order to meet the requirements of the
  • ANSI/SPRI GT-1 Standard. The bracket is a two-piece system allowing 1/2-in. size increments in the width of the gutter.
  • Custom-sized formed gutter available in a variety of profiles to fit your special requirements.
  • Standard profiles (seen on the right) are available for a professional appearance on the building exterior.
  • Full internal concealed splice. Made from the same metal and finish as the gutter cap creating a smooth unbroken and color-matched appearance.
  • Pre-punched holes allow proper spacing of fasteners and quick installation.
  • Factory Fabricated accessories. Corners, end caps, expansion joints, and other accessories are cut, bent, and welded to expedite installation time.
  • ANSI/SPRI GT-1 tested and fully warranted against blow-off. Tested, certified, and approved to withstand the peeling effects of strong winds. Manufacturer’s 25-year, 155 MPH wind warranty.
  • Factory Mutual Approved- Tested to the maximum gutter rating of 1-90.
Recent Posts
Contact Us

Thank you for your interest in Congress Associates! Please send us your contact info and we will respond promptly.

congressassociates lunchcongressassociates ElimiNailer